All over the world, helmet laws for motorcycles are put in place. The primary reason for these statutes is to protect motorcycle riders and passengers as they navigate the highways and byways.
Though many laws are in place regarding helmet laws, it seems that many riders choose not to follow the laws. One reason many give for not following the laws is because they believe they are ineffective. Others decide to disregard the laws merely because they see others not doing so. They prefer to conform to what they believe is best.
To keep current with the changing times, many countries tend to change their laws regularly. Many laws regarding helmet use are based on the people living in the area the laws will affect. There are many universal helmet laws that should be followed by anyone riding a motorcycle, though.
Helmet Laws You Should Always Follow
Though helmet laws around the world are different, there are a few laws that you should always follow any time you ride a motorcycle as the driver or passenger:
- Only use motorcycle helmets that are DOT approved: using an unapproved helmet is risky for riding on a motorcycle. Helmets that are not DOT approved often will not protect you in the case of an accident. Never use an ATV helmet while on a motorcycle.
- Ensure motorcycle passengers wear a helmet: the driver and the passenger should always wear a DOT approved helmet while on a motorcycle. Both take the same risk on the motorcycle and should be protected from head injuries in the event of an accident.
- Everyone should wear a helmet that fits: too often, children and other riders with a small head wear helmets that do not fit properly. To adequately protect the head, the helmet should fit snug on any rider.
Though many places may not have laws about wearing helmets on a motorcycle, it is important to do so for the safety of the driver and any passengers.
Check out our Advertising Partner: www.smartcreditcard.net
There are many reasons you should consider purchasing a Bluetooth helmet. The main one, though, is that it makes your life on a motorcycle easier. It is simpler to stay connected to friends and family members, as well as other riders, with a modern helmet that incorporates the Bluetooth feature. With these helmets, you can also listen to your GPS or enjoy your favorite music. Below are some advantages of a Bluetooth helmet:
- Keep in touch with loved ones: the technology in a Bluetooth helmet allows you to connect wirelessly to any cell phone, as well as any other riders nearby, with an integrated microphone. This frees your hands up to drive safely while making it easy to make and receive calls.
- Easy to get where you need to be: the capability of using GPS navigation with a Bluetooth helmet is highly convenient when you are unsure of where to go. You will no longer have to pull over on the side of the road to ask for directions. Instead, the GPS will inform you of every turn you need to take. Some GPS devices even allow you to activate the system through your voice, a convenient feature for anyone likely to get stranded. Towing companies in NJ use this same technology in their trucks.
- Enjoy your ride with your favorite music: with a conventional helmet, you can enjoy your music, but you are usually required to purchase an additional radio device to do so. The noise surrounding you on the motorcycle from the wind, the road, and other vehicles will typically interfere with the music, though. This is not a problem with a Bluetooth helmet that provides noise cancellation and surround You can easily pair a Bluetooth helmet with an MP3 player or your mobile phone so that you can enjoy clear digital sound anywhere.
Of course, as with any other helmet, the primary design of the Bluetooth helmet is to keep you safe in dangerous situations. Having the Bluetooth technology in your helmet simply adds an excellent bonus for any rider.
When riding motorcycles, riders must consider the importance of their safety gear. The most important thing to have for anyone riding on two wheels is a motorcycle helmet. Many new riders don’t anticipate accidents and will look for a cheap and fast solution for their head protection. In many ways, purchasing riding gear, such as the helmet, can be compared to appliance repair and appliance shopping. For example, there is a risk in not buying new equipment. Just like a used refrigerator may need appliance repair or does not have a warranty or guarantee, a used helmet can have this same problem. The padding and shell of the helmet is typically made to withstand a single use accident, followed by replacement. In addition to the effects of motorcycle accidents, helmets also deteriorate over time. Glues, residues, hair oils, and even some atmosphere exposure can lead to wear and tear. Purchasing new will help eliminate the risk of product malfunction, the need for appliance repair and ensure maximum effectiveness. Another correlation between helmets and appliances are the innovative and developing technologies that are implemented into the product to improve the quality and safety benefits. Some appliances meet special needs of the buyer, for example a commercial deep freezer could be appropriate in a restaurant, while a small family requires much less space. Identifying your needs will be the first step to finding the right helmet and other road gear. Many helmets have features that could improve the riding experience. For example, Bluetooth technologies and phone connectivity is a great feature in newer helmets, but may not be necessary for all riders. Also, when purchasing a helmet always do a preliminary fitting test; this includes being able to move the head side to side and a secure fastening. Just like when buying or repairing other appliances, make sure the product or service can be used for its intended purpose.
A huge part of helmet safety is upkeep. You need to make sure to take care of your helmet to keep it in great condition. Wear and tear on a helmet could make it less effective and leave you open to a nasty head injury. So what should you do to keep it safe?
1. Follow the care instructions
The manufacturer of the helmet gives care instructions, so follow them. Only use mild soap and only as recommended. Do not use cleaners that have a petroleum base. This is extremely important if you have a polycarbonate helmet. The inside could deteriorate if exposed to harsh cleaners.
2. Keep the vision clear
Use a mild soap and warm water. Get a soft cloth and work hard to keep it from getting scratched. If you do get scratches on your face shield, then replace it. Vision is key to safety, you must properly clean your face shield to keep vision clear, especially at night.
3. FRAGILE WARNING
Helmets may seem indestructible but they should be handled with care. Do not drop your helmet on concrete or other hard surfaces. This could severely screw up your helmet and affect its impact absorption ability. That is its primary function, so handle with extreme care!
Those are just a few tips for keeping your helmet clean and safe. Your helmet is the most important safety feature you have when riding a bike, so treat it like the friend that it is.
Shout out to http://www.richieshomeremodeling.com Richies home remodeling for the quick remodeling in our studio
A huge part of wearing a helmet is making sure that you get the right fit. There is no way to keep completely safe with a helmet that is not a perfect fit. It is much more technical than a simple match to your hat size or guessing small or large. Your head is unique, and while hat size can help get you started, your helmet is more specific. Usually try a smaller size, similar to a football helmet, and give it time to adjust to your head.
There are a few helmet sizes ranging from XXS to XXL. These may get confusing so you might want to get help from the maker of the helmet to compare to your head size. Different makes and models fit differently.
When choosing your helmet, be sure to try it on properly. Put your thumbs inside the straps, balance the helmet on your fingers, spread the sides apart and slide it down over the top of your head. Many times your helmet will feel quite tight until it adjusts to your head. Do not switch to a bigger size until you are sure that your helmet truly does not fit. If you get a helmet that is too big it could move when you need it most and leave you vulnerable. A proper fit is also important for making sure that you reduce noise that can be a distraction.
Helmet size is key to your safety, so try these few checks before you pick one.
• Make sure the pads touch your cheek without pressing too tight.
• Check that there are no gaps between your forehead and the pads.
• If it has a neck roll, make sure that doesn’t create a gap.
• Basically, make sure there isn’t a gap that will leave you vulnerable
BTW, I Just want to give a quick plug for my friends at sisbroinnovation They are awesome and you can find them at www.sisbroinnovation.com
Stay safe fellow riders!
Not all helmets work the same way. Playing football does not require the same protection as riding your motorcycle, so the helmets have to do different things. Your motorcycle helmet is extremely specialized and technical. This isn’t just hard plastic and a cushion. It is freaking science y’all!
There are a few components that work in cohesion to keep your dome safe. Check it out:
1. The Outer Shell
This is the most obvious part of the protection. There are different types of materials like polycarbonate that are used to make a great outer shell. It is designed to actually compress when it makes hard impact. This makes all of that intense force that was headed to your noggin disperse and hit you with less force. This is just part of it/
2. The Liner
The liner is right inside the shell and is usually made of a Styrofoam type material. This layer is super thick and absorbs the shock and reduces impact as your head tries to keep moving when the helmet comes to a stop. This works in conjunction with the shell to absorb impact that was headed for your brain. This greatly reduces the odds of receiving brain damage in an accident. Some of these helmets might even crack or break when they hit hard enough. Don’t freak out! That is what they are supposed to do in order to reduce impact.
3. Comfort Padding
This is the nice, soft, foam and smooth cloth that rubs nicely against your head. It keeps you comfy and keeps the helmet on your head nice and tight. This is a nice feature.
4. The Chin Strap
This is an important final piece. Without a chin strap, your helmet would fly off in a crash. Be sure to keep it on nice and tight all the time. Make sure to fasten it properly every sing time you ride.
So there you go. That is all the sweet technical stuff that your helmet does to keep you from getting your dome rocked. The next time you strap up, you will realize that a tone of research went in to keeping you completely safe as you enjoy your ride!
Need more reasons to not be an idiot and always wear a helmet when on your bike? How about the fact that they can make you stand out from the crowd!With all of the helmets on the market today that have been custom designed to look awesome while protecting you, it’s not too hard to find one that will keep you safe and look amazing at the same time!
With all of the helmets on the market today that have been custom designed to look awesome while protecting you, it’s not too hard to find one that will keep you safe and look amazing at the same time!
Resin Mohawks, chrome spikes and other features that you can add to an existing helmet are all options that can make a statement. With character designs from Batman to the Predator (a personal favorite of mine), you are bound to find something that you love that will keep your brains (even the little bit you might have) where they are supposed to be!
The pros for wearing a helmet every time go on and on!
What about helmets with built in tech like headphones that are Bluetooth linked to your phone? Hands free calling makes everyone safer, cyclists are possibly at the top of that lists! Heck, you can download software to your phone that allows you to speak your text messages, making you even safer!
And then of course there is the music while you’re cruising. Just be careful not to deafen yourself when you kill the engine because of how loud you’ve had to crank your tunes to hear it over the roar!
P.S.- A quick thanks to Pest Control Plainfield NJ for their help, you guys do great work!
Hi people, vince here
I wanted to take a moment to talk about the importance of wearing a helmet when on your bike.
It seems like a no-brainer (see what I did there?) to wear a helmet when cruising down the highway on your roadster or screaming down a backroad on your high cc sport bike. Despite this seemingly obvious necessity, a lot of knuckle heads still think they are cool enough to not need to mess up their hair.
Honestly, this kind of thinking isn’t just dumb; it’s just plain selfish!
How many things do we do without thinking about how it would affect others? Have you ever had to bury a friend or other loved one because they thought they were immortal? I have.
Make no mistake, not wearing a helmet doesn’t make you cool, it makes you an accident waiting to happen.
Here are 3 reasons to always, always wear a helmet:
1. Protect Your Brain! Even a low speed skid that ends in a laydown can do serious damage to an unprotected head. The last thing you want when riding your bike is to worry about being permanently disfigured or suffer a head injury that leaves you drooling on yourself.
2. Increase Your Visibility! Motorists from cars to massive cargo trucks don’t always think to pay attention to us bike folks. Wearing a helmet (especially a cool looking helmet) increase your visibility to other vehicle operators, which can save your life!
3. Protection from Road Debris! When was the last time you were driving your car, truck or other vehicle and had something suddenly crack into your windshield? Now imagine something moving that fast hitting you in the face while you are on your bike!